With 13.2 cm between the air nozzles and the wall, there is more than enough space from large hands to dry comfortably.
A 0.1 sec Quick Response with optimised hand sensors that quickly react to users input for a more positive user experience.
The wide 15 cm nozzle spreads airflow across a large area, enabling both hands to be covered at the same time.
The Jet Towel does not create any paper waste, eliminating the trouble of waste disposal.
The cost of constantly replacing paper towels each day can be staggering.
Paper Towels need to be constantly refilled and paper garbage removed throughout the day.
The protective steel outer shell and ABS body are designed to take quite a beating. They have been tested to withstand 15 J, which is more than two times the energy of an average impact*.
*Mitsubishi Electric estimates
The air filter is important as it prevents excess dust and dirt from accumulating inside of the unit.
The filter is placed conveniently right up against the side of the intake grill, allowing for quick cleaning without any disassembly required.
NSF International, an independent third-party public safety health and standards organisation, has certified Jet Towels to be compliant in its rigorous requirements (NSF/ANSi 169).
The top of the Jet Towel Smart is tilted at a 12-degree angle to prevent users from leaving unwanted trash and other objects on the unit.
The air intake is located separately from the output nozzles to reduce the risk of water intake.
High-voltage circuit boards are completely covered by a protective metal enclosure. In the highly unlikely event of a fire occurring, flames are sealed in and cannot spread outside of the barrier.
JT-S2AP-W-NE - White
|Drying method||Single jet airflow drying|
|Power supply||220 V - 240 V 50/60 Hz|
|Drying time*1 (sec)||High||9~12||10~13|
|Power consumption (W)||High||880-980||630-730|
|Air speed (m/s)||High||150-158|
|Noise level *2 (dB)||High||60-62|
|Motor type||Commutator motor|
|External dimensions (W x D x H) (mm)||250 x 160 x 290|
|Drain tank (L)||N/A|
|Download specification sheet|
*1 Time needed to reduce remaining water to 50 mg or less per hand (in-house study).
*2 Measurements made in anechoic chamber at a distance of 2 m.
*3 Excluding front panel